C & K 700L
just moved into an ex-rental property.....got a nicely working 700l except theres no code supplied for it (well there is but it's not working tried to reset it and everything it just beeps).....is...
View ArticleScantronic 9651
Hi all I hope some one can help me with my alarm. On the keypad it says proSec 9651 but after some searching and reading on here,I think it is a scantronic 9651 with 9943 Keypad. I've tried to set it...
View ArticleConservatory detector
When the lean-to back addition was replaced by a conservatory the door contact wiring was cut back to the house wall / conservatory corner and a pir installed. This gave some false alarms and was...
View Articlegardtec 360/580
Hi Guys, My mum and dad have a gardtec 360/580 that came with the new build house they bought around 14 years ago. Today its been going off randomly and the message on the keypad screen seems to...
View ArticleGardtec 360-580 battery change
Hi All, My parents have a gardtec 360-580 that is displaying an Fb sign indicating it requires a battery change. After reading the eng manual, it describes that if an eng code was set that begins with...
View ArticleConverting DP to EOL
An apology if this has been asked before. System is Castle Euromini which is a recent replacement using the existing DP global tamper wiring. I am contemplating converting it all over to DEOL however...
View ArticleCooper 9561 with 9930 keypad - wont stop bleeping
Hi, We had a powercut / surge a few weeks ago causing a number of alarms in the street to go off. Ours didn't go off, but the keypad is now driving us nuts. The Service LED is on and it keeps throwing...
View ArticleClik here to view.
Gardtec 370 Manual
Gardtec 370 Manual GT-Gardtec-370-581-582-User-Guide.pdf (Size: 26.99 KB / Downloads: 0)
View ArticleMelcom ST8008 Faults in service or Installation
There have not been many failures to date, the pcb assembly of these panels are very well made. 1/ Dialer failed but no warning message. Simply no action either dialing out or picking up. Not fixable....
View ArticleClik here to view.
Installation Procedure for Melcom 6600
Introduction This document is an overview of the steps to take to install your alarm system. You can install the system in a different order however our experience shows having one sector operational...
View ArticleClik here to view.
Tamper Warning Scantronic 9751
The backup battery on my house alarm was low so I purchased a replacement and opened the unit to replace the battery. Obviously I didn't get the tamper replaced correctly as when I turned the system on...
View ArticleScantronics 9800+ F6 code on 9827 cntl unit
hi folks new to the forum, moved to a new home (well old prewar bungalow) and I was wondering if anyone can tell me what an F6 code is on a Scantronics 9800+ alarm. This is being displayed on the 9827...
View ArticleBell goes off
Hi, After doing a full set on a Scantronic 9448, when I open the door the bell box sounds straight away. When I enter the user code it says TAMPER. Anyone any ideas?
View ArticleClik here to view.
Tate T-BP8Z alarm panel
Tate T-BP8Z 8-zone Control Panel.jpg (Size: 33.53 KB / Downloads: 3) Tate T-BP8Z alarm panel
View ArticleGardtec Anti-Code
Hello all, We bought a property about 6 months ago with a Gardtec 370 installed and up until recently it has worked fine. The problem is that every 2-3 weeks we require to contact the company who...
View Articlemelcom st5000 to AG6
Hello and what a very informative site,so glad this is here and hopefully i can be helped out. Iv'e fitted a few alarms in the past,it isn't my normal job,just for family but things were easier a few...
View ArticleClik here to view.
Scantronic 9651 (Tamper Error Code)
Hi There, I feel a complete idiot, Just moved into a new house, Why oh Why did I try to open the hidden alarm box thinking it was something to do with the Landline. Now I have a Tamper code on key...
View ArticleWiring Help
Hi to All, Can you help, i have re-installed an alarm for someone using existing equipment, VERITAS 8 panel and a pyronix belle. All working ok apart from the bell box. The original install was done in...
View Article